Command Line Interface
Alluxio’s command line interface provides users with basic file system operations. You can invoke the following command line utility to get all the subcommands:
./bin/alluxio fs
Usage: alluxio fs [generic options]
[cat <path>]
[checkConsistency [-r] <Alluxio path>]
...
For fs
subcommands that take Alluxio URIs as argument (e.g. ls
, mkdir
), the argument should
be either a complete Alluxio URI alluxio://<master-hostname>:<master-port>/<path>
, or /<path>
without header provided to use the default hostname and port set in the
conf/allluxio-site.properties
.
Wildcard input
Most of the commands which require path components allow wildcard arguments for ease of use. For example:
./bin/alluxio fs rm /data/2014*
The example command would delete anything in the
data
directory with a prefix of2014
.Note that some shells will attempt to glob the input paths, causing strange errors (Note: the number 21 could be different and comes from the number of matching files in your local filesystem):
rm takes 1 arguments, not 21
As a work around, you can disable globbing (depending on your shell, for example
set -f
) or by escaping wildcards, for example:./bin/alluxio fs cat /\\*
Note the double escape, this is because the shell script will eventually call a java program which should have the final escaped parameters (
cat /\\*
).
List of Operations
Operation | Syntax | Description |
---|---|---|
cat | cat "path" | Print the content of the file to the console. |
checkConsistency | checkConsistency "path" | Check the metadata consistency between Alluxio and the under storage. |
checksum | checksum "path" | Calculate the md5 checksum for a file. |
chgrp | chgrp "group" "path" | Change the group of the directory or file. |
chmod | chmod "permission" "path" | Change the permission of the directory or file. |
chown | chown "owner" "path" | Change the owner of the directory or file. |
copyFromLocal | copyFromLocal "source path" "remote path" | Copy the specified file specified by "source path" to the path specified by "remote path". This command will fail if "remote path" already exists. |
copyToLocal | copyToLocal "remote path" "local path" | Copy the specified file from the path specified by "remote path" to a local destination. |
count | count "path" | Display the number of folders and files matching the specified prefix in "path". |
cp | cp "src" "dst" | Copy a file or directory within the Alluxio file system. |
du | du "path" | Display the size of a file or a directory specified by the input path. |
fileInfo | fileInfo "path" | Print the information of the blocks of a specified file. |
free | free "path" | Free a file or all files under a directory from Alluxio. If the file/directory is also in under storage, it will still be available there. |
getCapacityBytes | getCapacityBytes | Get the capacity of the AlluxioFS. |
getUsedBytes | getUsedBytes | Get number of bytes used in the AlluxioFS. |
help | help "cmd" | Prints help message for the given command. If there isn't given command, prints help messages for all supported commands. |
leader | leader | Prints the current Alluxio leader master host name. |
load | load "path" | Load the data of a file or a directory from under storage into Alluxio. |
loadMetadata | loadMetadata "path" | The loadMetadata command is deprecated since Alluxio version 1.1. Please use "alluxio fs ls <path>" command instead. Load the metadata of a file or a directory from under storage into Alluxio. |
location | location "path" | Display a list of hosts that have the file data. |
ls | ls "path" | List all the files and directories directly under the given path with information such as size. |
masterInfo | masterInfo | Prints information regarding master fault tolerance such as leader address, list of master addresses, and the configured Zookeeper address. |
mkdir | mkdir "path1" ... "pathn" | Create directory(ies) under the given paths, along with any necessary parent directories. Multiple paths separated by spaces or tabs. This command will fail if any of the given paths already exist. |
mount | mount "path" "uri" | Mount the underlying file system path "uri" into the Alluxio namespace as "path". The "path" is assumed not to exist and is created by the operation. No data or metadata is loaded from under storage into Alluxio. After a path is mounted, operations on objects under the mounted path are mirror to the mounted under storage. |
mv | mv "source" "destination" | Move a file or directory specified by "source" to a new location "destination". This command will fail if "destination" already exists. |
persist | persist "path1" ... "pathn" | Persist files or directories currently stored only in Alluxio to the underlying file system. |
pin | pin "path" | Pin the given file to avoid evicting it from memory. If the given path is a directory, it recursively pins all the files contained and any new files created within this directory. |
report | report "path" | Report to the master that a file is lost. |
rm | rm "path" | Remove a file. This command will fail if the given path is a directory rather than a file. |
setTtl | setTtl "path" "time" | Set the TTL (time to live) in milliseconds to a file. Allow to perform either "delete" or "free" after expiry of ttl interval. |
stat | stat "path" | Displays info for the specified path both file and directory. |
tail | tail "path" | Print the last 1KB of the specified file to the console. |
test | test "path" | Test a property of a path, returning 0 if the property is true, or 1 otherwise. |
touch | touch "path" | Create a 0-byte file at the specified location. |
unmount | unmount "path" | Unmount the underlying file system path mounted in the Alluxio namespace as "path". Alluxio objects under "path" are removed from Alluxio, but they still exist in the previously mounted under storage. |
unpin | unpin "path" | Unpin the given file to allow Alluxio to evict this file again. If the given path is a directory, it recursively unpins all files contained and any new files created within this directory. |
unsetTtl | unsetTtl "path" | Remove the TTL (time to live) setting from a file. |
Example Use Cases
cat
The cat
command prints the entire contents of a file in Alluxio to the console. This can be useful for verifying the file is what the user expects. If you wish to copy the file to your local file system, copyToLocal
should be used.
For example, when trying out a new computation job, cat
can be used as a quick way to check the output:
./bin/alluxio fs cat /output/part-00000
checkConsistency
The checkConsistency
command compares Alluxio and under storage metadata for a given path. If the path is a directory, the entire subtree will be compared. The command returns a message listing each inconsistent file or directory. The system administrator should reconcile the differences of these files at their discretion. To avoid metadata inconsistencies between Alluxio and under storages, design your systems to modify files and directories through the Alluxio and avoid directly modifying state in the underlying storage.
If the -r
option is used, the checkConsistency command will repair all inconsistent files and directories
under the given path. If an inconsistent file or directory exists only in under storage, its metadata will
be added to Alluxio. If an inconsistent file exists in Alluxio and its data is fully present in Alluxio, its metadata
will be loaded to Alluxio again.
NOTE: This command requires a read lock on the subtree being checked, meaning writes and updates to files or directories in the subtree cannot be completed until this command completes.
For example, checkConsistency
can be used to periodically validate the integrity of the namespace.
# List each inconsistent file or directory
./bin/alluxio fs checkConsistency /
#
# Repair the inconsistent files or directories
./bin/alluxio fs checkConsistency -r /
checksum
The checksum
command outputs the md5 value of a file in Alluxio.
For example, checksum
can be used to verify the content of a file stored in Alluxio matches the content stored in an UnderFS or local filesystem:
./bin/alluxio fs checksum /LICENSE
md5sum: bf0513403ff54711966f39b058e059a3
md5 LICENSE
MD5 (LICENSE) = bf0513403ff54711966f39b058e059a3
chgrp
The chgrp
command changes the group of the file or directory in Alluxio. Alluxio supports file authorization with Posix file permission. Group is an authorizable entity in Posix file permission model. The file owner or super-user can execute this command to change the group of the file or directory.
Adding -R
option also changes the group of child file and child directory recursively.
For example, chgrp
can be used as a quick way to change the group of file:
./bin/alluxio fs chgrp alluxio-group-new /input/file1
chmod
The chmod
command changes the permission of file or directory in Alluxio. Currently octal mode is supported: the numerical format accepts three octal digits which refer to permissions for the file owner, the group and other users. Here is number-permission mapping table:
Adding -R
option also changes the permission of child file and child directory recursively.
Number | Permission | rwx |
---|---|---|
7 | read, write and execute | rwx |
6 | read and write | rw- |
5 | read and execute | r-x |
4 | read only | r-- |
3 | write and execute | -wx |
2 | write only | -w- |
1 | execute only | --x |
0 | none | --- |
For example, chmod
can be used as a quick way to change the permission of file:
./bin/alluxio fs chmod 755 /input/file1
chown
The chown
command changes the owner of the file or directory in Alluxio. For obvious security reasons, the ownership of a file can only be altered by a super-user.
Adding -R
option also changes the owner of child file and child directory recursively.
For example, chown
can be used as a quick way to change the owner of file:
./bin/alluxio fs chown alluxio-user /input/file1
copyFromLocal
The copyFromLocal
command copies the contents of a file in your local file system into Alluxio. If the node you run the command from has an Alluxio worker, the data will be available on that worker. Otherwise, the data will be copied to a random remote node running an Alluxio worker. If a directory is specified, the directory and all its contents will be copied recursively.
For example, copyFromLocal
can be used as a quick way to inject data into the system for processing:
./bin/alluxio fs copyFromLocal /local/data /input
copyToLocal
The copyToLocal
command copies the contents of a file in Alluxio to a file in your local file system. If a directory is specified, the directory and all its contents will be downloaded recursively.
For example, copyToLocal
can be used as a quick way to download output data for additional investigation or debugging.
./bin/alluxio fs copyToLocal /output/part-00000 part-00000
wc -l part-00000
count
The count
command outputs the number of files and folders matching a prefix as well as the total size of the files. count
works recursively and accounts for any nested directories and files. count
is best utilized when the user has some predefined naming conventions for their files.
For example, if data files are stored by their date, count
can be used to determine the number of data files and their total size for any date, month, or year.
./bin/alluxio fs count /data/2014
cp
The cp
command copies a file or directory in the Alluxio file system or between local file system
and Alluxio file system.
Scheme file
indicates the local file system and scheme alluxio
or no scheme indicates
the Alluxio file system.
If the -R
option is used and the source designates a directory, cp copies the entire subtree at source to the destination.
For example, cp
can be used to copy files between Under file systems.
./bin/alluxio fs cp /hdfs/file1 /s3/
du
The du
command outputs the size of a file. If a directory is specified, it will output the aggregate size of all files in the directory and its children directories.
For example, if the Alluxio space is unexpectedly over utilized, du
can be used to detect which folders are taking up the most space.
./bin/alluxio fs du /\\*
fileInfo
The fileInfo
command is deprecated since Alluxio version 1.5. Please use alluxio fs stat <path>
command instead.
The fileInfo
command dumps the FileInfo representation of a file to the console. It is primarily intended to assist powerusers in debugging their system. Generally viewing the file info in the UI will be much easier to understand.
For example, fileInfo
can be used to debug the block locations of a file. This is useful when trying to achieve locality for compute workloads.
./bin/alluxio fs fileInfo /data/2015/logs-1.txt
free
The free
command sends a request to the master to evict all blocks of a file from the Alluxio workers. If the argument to free
is a directory, it will recursively free
all files. This request is not guaranteed to take effect immediately, as readers may be currently using the blocks of the file. free
will return immediately after the request is acknowledged by the master. Note that, files must be persisted already in under storage before being freed, or the free
command will fail; also any pinned files cannot be freed unless -f
option is specified. The free
command does not delete any data from the under storage system, but only removing the blocks of those files in Alluxio space to reclaim space. In addition, metadata will not be affected by this operation, meaning the freed file will still show up if an ls
command is run.
For example, free
can be used to manually manage Alluxio’s data caching.
./bin/alluxio fs free /unused/data
getCapacityBytes
The getCapacityBytes
command returns the maximum number of bytes Alluxio is configured to store.
For example, getCapacityBytes
can be used to verify if your cluster is set up as expected.
./bin/alluxio fs getCapacityBytes
getUsedBytes
The getUsedBytes
command returns the number of used bytes in Alluxio.
For example, getUsedBytes
can be used to monitor the health of your cluster.
./bin/alluxio fs getUsedBytes
help
The help
command prints the help message for a given fs
subcommand. If there isn’t given
command, prints help messages for all supported subcommands.
Examples:
# Print all subcommands
./bin/alluxio fs help
#
# Print help message for ls
./bin/alluxio fs help ls
leader
The leader
command prints the current Alluxio leader master host name.
./bin/alluxio fs leader
load
The load
command moves data from the under storage system into Alluxio storage. If there is a Alluxio worker on the machine this command is run from, the data will be loaded to that worker. Otherwise, a random worker will be selected to serve the data. Load will no-op if the file is already in Alluxio memory level storage. If load
is run on a directory, files in the directory will be recursively loaded.
For example, load
can be used to prefetch data for analytics jobs.
./bin/alluxio fs load /data/today
loadMetadata
The loadMetadata
command is deprecated since Alluxio version 1.1.
Please use alluxio fs ls <path>
command instead.
The loadMetadata
command queries the under storage system for any file or directory matching the given path and then creates a mirror of the file in Alluxio backed by that file. Only the metadata, such as the file name and size are loaded this way and no data transfer occurs.
For example, loadMetadata
can be used when other systems output to the under storage directly (bypassing Alluxio), and the application running on Alluxio needs to use the output of those systems.
./bin/alluxio fs loadMetadata /hdfs/data/2015/logs-1.txt
location
The location
command returns the addresses of all the Alluxio workers which contain blocks belonging to the given file.
For example, location
can be used to debug data locality when running jobs using a compute framework.
./bin/alluxio fs location /data/2015/logs-1.txt
ls
The ls
command lists all the immediate children in a directory and displays the file size, last modification time, and in memory status of the files. Using ls
on a file will only display the information for that specific file.
The ls
command will also load the metadata for any file or immedidate children of a directory
from the under storage system to Alluxio namespace, if it does not exist in Alluxio yet. ls
queries the under storage system for any file or directory matching the given path and then creates
a mirror of the file in Alluxio backed by that file. Only the metadata, such as the file name and
size are loaded this way and no data transfer occurs.
Options:
-d
option lists the directories as plain files. For example,ls -d /
shows the atrributes of root directory-f
option forces loading metadata for immediate children in a directory. By default, it loads metadata only at the first time at which a directory is listed.-h
option displays file sizes in human-readable formats.-p
option lists all pinned files-R
option also recursively lists child directories, displaying the entire subtree starting from the input path.
For example, ls
can be used to browse the file system.
./bin/alluxio fs mount /s3/data s3n://data-bucket/
# Loads metadata for all immediate children of /s3/data and lists them.
./bin/alluxio fs ls /s3/data/
#
# Forces loading metadata.
aws s3 cp /tmp/somedata s3n://data-bucket/somedata
./bin/alluxio fs ls -f /s3/data
#
# Files are not removed from Alluxio if they are removed from the UFS (s3 here) only.
aws s3 rm s3n://data-bucket/somedata
./bin/alluxio fs ls -f /s3/data
masterInfo
The masterInfo
command prints information regarding master fault tolerance such as leader address, list of master addresses, and the configured Zookeeper address. If Alluxio is running in single
master mode, masterInfo
will print the master address. If Alluxio is running in fault tolerance mode,
the leader address, list of master addresses and the configured Zookeeper address will be printed.
For example, masterInfo
can be used to print information regarding master fault tolerance.
./bin/alluxio fs masterInfo
mkdir
The mkdir
command creates a new directory in Alluxio space. It is recursive and will create any nonexistent parent directories. Note that the created directory will not be created in the under storage system until a file in the directory is persisted to the underlying storage. Using mkdir
on an invalid or already existing path will fail.
For example, mkdir
can be used by an admin to set up the basic folder structures.
./bin/alluxio fs mkdir /users
./bin/alluxio fs mkdir /users/Alice
./bin/alluxio fs mkdir /users/Bob
mount
The mount
command links an under storage path to an Alluxio path, and files and folders created in Alluxio space under the path will be backed by a corresponding file or folder in the under storage path. For more details, see Unified Namespace.
Options:
--readonly
option sets the mount point to be readonly in Alluxio--option <key>=<val>
option passes an property to this mount point (e.g., S3 credential)
For example, mount
can be used to make data in another storage system available in Alluxio.
./bin/alluxio fs mount /mnt/hdfs hdfs://host1:9000/data/
./bin/alluxio fs mount --option aws.accessKeyId=<accessKeyId> --option aws.secretKey=<secretKey>\
/mnt/s3 s3a://data-bucket/
mv
The mv
command moves a file or directory to another path in Alluxio. The destination path must not exist or be a directory. If it is a directory, the file or directory will be placed as a child of the directory. mv
is purely a metadata operation and does not affect the data blocks of the file. mv
cannot be done between mount points of different under storage systems.
For example, mv
can be used to move older data into a non working directory.
./bin/alluxio fs mv /data/2014 /data/archives/2014
persist
The persist
command persists data in Alluxio storage into the under storage system. This is a data operation and will take time depending on how large the file is. After persist is complete, the file in Alluxio will be backed by the file in the under storage, make it still valid if the Alluxio blocks are evicted or otherwise lost.
For example, persist
can be used after filtering a series of temporary files for the ones containing useful data.
./bin/alluxio fs persist /tmp/experimental-logs-2.txt
pin
The pin
command marks a file or folder as pinned in Alluxio. This is a metadata operation and will not cause any data to be loaded into Alluxio. If a file is pinned, any blocks belonging to the file will never be evicted from an Alluxio worker. If there are too many pinned files, Alluxio workers may run low on storage space preventing other files from being cached.
For example, pin
can be used to manually ensure performance if the administrator understands the workloads well.
./bin/alluxio fs pin /data/today
report
The report
command marks a file as lost to the Alluxio master. This command should only be used with files created using the Lineage API. Marking a file as lost will cause the master to schedule a recomputation job to regenerate the file.
For example, report
can be used to force recomputation of a file.
./bin/alluxio fs report /tmp/lineage-file
rm
The rm
command removes a file from Alluxio space and the under storage system. The file will be unavailable immediately after this command returns, but the actual data may be deleted a while later.
Add -R
option will delete all contents of the directory and then the directory itself. Add -U
option to not check whether the UFS contents being deleted are in-sync with Alluxio before attempting to delete persisted directories.
For example, rm
can be used to remove temporary files which are no longer needed.
./bin/alluxio fs rm /tmp/unused-file
setTtl
The setTtl
command sets the time-to-live of a file or a directory, in milliseconds. If set ttl to a directory, all the children inside that directory will set too. So a directory’s TTL expires, all the children inside that directory will also expire. Action parameter will indicate the action to perform once the current time is greater than the TTL + creation time of the file. Action delete
(default) will delete file or directory from both Alluxio and the under storage system, whereas action free
will just free the file from Alluxio even they are pinned.
For example, setTtl
with action delete
can be used to clean up files the administrator knows are unnecessary after a period of time, or with action free
just remove the contents from Alluxio to make room for more space in Alluxio.
./bin/alluxio fs setTtl -action free /data/good-for-one-day 86400000
stat
The stat
command dumps the FileInfo representation of a file or a directory to the console. It is primarily intended to assist powerusers in debugging their system. Generally viewing the file info in the UI will be much easier to understand.
One can specify -f <arg>
to display info in given format:
- “%N”: name of the file;
- “%z”: size of file in bytes;
- “%u”: owner;
- “%g”: group name of owner;
- “%y” or “%Y”: modification time, %y shows ‘yyyy-MM-dd HH:mm:ss’ (the UTC date), %Y it shows milliseconds since January 1, 1970 UTC;
- “%b”: Number of blocks allocated for file
For example, stat
can be used to debug the block locations of a file. This is useful when trying to achieve locality for compute workloads.
# Displays file's stat
./bin/alluxio fs stat /data/2015/logs-1.txt
#
# Displays directory's stat
./bin/alluxio fs stat /data/2015
#
# Displays the size of file
./bin/alluxio fs stat -f %z /data/2015/logs-1.txt
tail
The tail
command outputs the last 1 kb of data in a file to the console.
For example, tail
can be used to verify the output of a job is in the expected format or contains expected values.
./bin/alluxio fs tail /output/part-00000
test
The test
command tests a property of a path, returning 0 if the property is true, or 1
otherwise. Specify -d
to test whether the path is a directory, Specify -f
to test whether the path is a file, Specify -e
to test whether the path
exists, Specify -s
to test whether the directory is not empty, Specify -z
to test whether the file is zero length,
Options:
-d
option tests whether path is a directory.-e
option tests whether path exists.-f
option tests whether path is a file.-s
option tests whether path is not empty.-z
option tests whether file is zero length.
Examples:
./bin/alluxio fs test -d /someDir
echo $?
touch
The touch
command creates a 0-byte file. Files created with touch
cannot be overwritten and are mostly useful as flags.
For example, touch
can be used to create a file signifying the compeletion of analysis on a directory.
./bin/alluxio fs touch /data/yesterday/_DONE_
unmount
The unmount
command disassociates an Alluxio path with an under storage directory. Alluxio metadata for the mount point will be removed along with any data blocks, but the under storage system will retain all metadata and data. See Unified Namespace for more dtails.
For example, unmount
can be used to remove an under storage system when the users no longer need data from that system.
./bin/alluxio fs unmount /s3/data
unpin
The unpin
command unmarks a file or directory in Alluxio as pinned. This is a metadata operation and will not evict or delete any data blocks. Once a file is unpinned, its data blocks can be evicted from the various Alluxio workers containing the block.
For example, unpin
can be used when the administrator knows there is a change in the data access pattern.
./bin/alluxio fs unpin /data/yesterday/join-table
unsetTtl
The unsetTtl
command will remove the TTL of a file in Alluxio. This is a metadata operation and will not evict or store blocks in Alluxio. The TTL of a file can later be reset with setTtl
.
For example, unsetTtl
can be used if a regularly managed file requires manual management due to some special case.
./bin/alluxio fs unsetTtl /data/yesterday/data-not-yet-analyzed